Top Tips For Successful Asphalt Sealcoating in The Fall

Successful asphalt sealcoating is an important maintenance task that will keep your pavement in great shape over the long haul. Generally, contractors prefer blacktop sealing in the spring due to its ideal temperature and environmental conditions. However, sealcoating in the fall can also be beneficial. In this blog, we’ll provide valuable tips to ensure your fall-time Atlanta asphalt sealcoating appointment goes off without a hitch.

What Can I Do to Prepare My Pavement for Sealcoating in the Fall?

Successful asphalt sealcoating requires ample preparation. The asphalt sealing products contractors use to protect your pavement must bond to the surface during curing. That can’t happen if your pavement is dirty or damaged.

Before you get blacktop sealing, take time to clean your pavement. Sweep or blow away dirt, yard debris and more. If necessary, consider washing the asphalt a few days before your appointment. From there, contractors can take over.

Seasoned contractors will inspect the pavement and address any concerns before sealcoating. They’ll seal cracks, perform repairs and pretreat stains caused by leaking vehicle fluids.

What Conditions Are Necessary for Successful Asphalt Sealcoating?

Contractors can use many types of asphalt sealer products. Each one is different, requiring unique steps for preparation and application. However, most will have specific recommendations around the application environment.

Asphalt sealers usually need temperatures above 50 degrees Fahrenheit. They also need good air circulation and plenty of exposure to the heal. Sealcoating in the fall can be challenging due to cooler conditions. Therefore, it’s important to monitor the forecast to ensure success.

How Long Does Sealcoating in the Fall Need to Cure?

Atlanta asphalt sealcoating needs a minimum of 24 hours to cure. However, things can take longer in the fall. As mentioned earlier, environmental conditions matter. Ideal curing conditions are dry, warm and mildly windy. If the temperatures are too hot or cold, the asphalt sealer can cure unevenly and fail to form a tight bond with your pavement.

Because fall has cooler temperatures, sealcoating may take up to 48 hours to cure. Allow your contractors to inspect the asphalt sealer. They’ll block your pavement off to keep drivers and pedestrians out. Only after the blacktop sealing cures will they open your pavement up for use.

Can Contractors Perform Asphalt Sealing in Cloudy or Rainy Weather?

Whatever you do, don’t schedule asphalt sealcoating on rainy days. Asphalt sealing and water don’t mix. Precipitation will wash the product away. Any that stays behind will trap moisture, resulting in peeling and flaking.

Sealcoating is possible on overcast days. However, your contractors should ensure zero chance of rain throughout the application and curing process. For the greatest chance of success, the conditions should be warm with low humidity.

Don’t leave your Atlanta asphalt sealcoating to amateurs. The Surface Masters is Atlanta’s premier provider of asphalt sealcoating. Our award-winning company has earned a solid reputation among our clients. We work hard to meet your needs and deliver top-notch results. We’re available for new asphalt paving, maintenance, repairs, milling and reclamation, and more.

Call The Surface Masters at (770)250-6392, email Info@TheSurfaceMasters.com or use our online contact form to get in touch and get your free quote.